Yritysasiakas?

Ostoskori:

0 tuote(tta) - 0,00 €
Ostoskorisi on tyhjä.

0

Lisää kuvia

Tonyin Nano Ceramic Coating 30 ml + degreaser 50 ml

Saatavuus: Varastossa

88,00 €

Kuvaus

Tonyin Nano Ceramic Crystal coating is endowed with double plating finish crystallization layer, can attach to the paint surface firmly. It can effectively protect your paint against outside, prevent from scratch, acid rain, oxidation, bird's dropping and bugs.
TAI

Yksityiskohdat

Tonyin Nano Ceramic Crystal coating is endowed with double plating finish crystallization layer, can attach to the paint surface firmly. It can effectively protect your paint against outside, prevent from scratch, acid rain, oxidation, bird's dropping and bugs. Featured with excellent dustproof, decontamination and easy cleaning performance, it makes your coating parts shining and protects all aspects of your car.

Käyttö

Nano Ceramic Coating Process:

  1. Wash your car before application.
  2. Make paint correction with abrasive and polishing compounds for best result.
  3. Remove all scratches and polish to perfection.
  4. Clean surface with degreasant, make it clean and dry.
  5. Apply coating EVENLY section by section.
  6. Smear and inspect during drying. Check and correct for uneven smearing while coating have not been hardened.
  7. Wipe off with clean microfiber after 20-25 mins.
  8. Leave 24 hours’ curing time. (For better effect, 2-4 layers coatings are recommended).

Notes After Coating:

  • Do not wet or touch the paint work within 24 hours.
  • Do not use the vehicle for 24 hours after coating.
  • For max cure and hardness, do not wash the car within 7 days!
  • TIP: to speed up the curing time you can use an infrared heater set at 250-275°F (120-130°C) for 25 minutes on each area.

Lisätiedot

Tuottaja Tonyin
Tuotekoodi TC01A1
EAN N/A
Paino 0.4200
Mitat / Tilavuus 30 ml
Valmistusmaa Kiina

Tuotteen asiasanat

Käytä välilyöntejä erottaaksesi asiasanat. Käytä puolilainausmerkkejä (') lauseille.